Advanced Micrbial Solutions
AMS - Solutions for the Soil
HomeContact UsSitemap

Products and SolutionsField ApplicationScience and TechnologyNews and PublicationsCompany Profile
     
      Field Application
 


Case Studies
Agriculture
Turf and Ornamentals
Application Protocols
Agriculture
Turf and Ornamentals
Product Storage
 

Application Protocols — Agriculture

Untitled Document See product labels for additional details or contact your SuperBio distributor or sales rep.

General application procedures for SuperBio Ag Blend

  • For each acre, mix 1-2 gallons of SuperBio Ag Blend with at least 10 gallons of water and/or liquid fertilizer. If mixing with liquid fertilizer that has not been diluted with water, it is preferable to mix 1:1 with water prior to adding the Ag Blend. Higher dilution ratios are not detrimental.
  • Apply through irrigation or use existing spray equipment, Hi-Boy or fan sprayers. Ensure at least 1 gallon of SuperBio Ag Blend is distributed per acre.
  • If mixing with other products, avoid highly acidic or alkaline conditions. It is also recommended to jar test mixtures of SuperBio Ag Blend with other chemical fertilizers prior to use.
  • Do not mix with fungicides.
  • Do not tank mix with high salt fertilizers (28% or 32% liquid N).

Seed treatments

  • Use one (1) quart of Ag Blend per acre (assumes 30" to 42" row widths) mixed with at least 2.5 gallons of water.
  • Apply with a nozzle that sprays approximately 6" in width and is directed onto and into the seed furrow opening.

Transplanting

  • The bare roots or seed tray may be drenched (dipped) in a solution of 2 to 4 ounces Ag Blend with 1 gallon water (32:1 ratio).
  • Or apply the solution to the soil around the ball of the plant and into the hole at planting.
  • For optimum results, spray the soil at the recommended rates 1-2 weeks prior to transplanting and then again 15- 45 days after transplanting at 2 quarts per acre.

Citrus Groves

  • For initial applications during the growing season, a combination of 2 quarts Ag Blend and 2 quarts SoilBuilder (along with appropriate water for dilution) per acre has proven effective, especially when applied along with fertilizers.
  • Subsequent applications should be made every 3-4 months using the same combination of Ag Blend and SoilBuilder.

Fumigated vegetables, strawberries and watermelons

  • If using a starter fertilizer (poly start, jump start, kick start, etc.) mix 1 gallon SoilBuilder to 100 gallons transplant water at planting time.
  • Inject a second treatment 15-30 days later (preferably with a fertilizer application) at 2 quarts Ag Blend per acre through the drip system. For strawberries it is recommended to treat a third time at half the rate.
  • If no starter fertilizer is used at transplanting, then use 2 quarts SoilBuilder and 2 quarts Ag Blend per 100 gallons of water. Second treatment is the same.

Organic farms

  • Use SuperBio SoilBuilder at the rate of 1-2 gallons mixed with at least 10 gallons water per acre.
  • Diluted product may be applied directly to the soil as a pre-plant and/or post-plant treatment or as a foliar application.
  • Excellent as a starter or co-mix for compost teas.
  • For transplanting, roots or seed trays should be drenched (dipped) with 4-6 ounces SoilBuilder mixed with 1 gallon water. May also be sprayed onto bare rootstock prior to transplanting.
  • For seedbeds, mix 1 gallon SoilBuilder with 10 gallons water and spray over seeds at planting or onto moistened pre-seeded soil.